|
|
|
|
Nauta Small Holding/Diesel Tank, 25g w/ Fittings Installed
MFG#: FT915152
SKU:
$659.00
$528.95 Captain's Price!
|
| See our full line of flexible tanks here.
|
Stop that smelly odor. Replace those cheap holding tanks with a new leakproof, odor-free Nauta Holding Tank.
The more rigorously enforced laws against overboard discharge now make non-compliance extremely costly. A Nauta flexible holding tank, on the other hand, provides a relatively inexpensive Type III solution. The Tedlar lining of these Nauta tanks prevents gas permeation, thus stopping a major odor problem with many other cheaper holding tanks. Combined with a few other components, this solution is both legal and far less costly than re-plumbing a vessel or installing a more complex and expensive Type I or Type II system: it occupies less space and requires no electrical power. |
| |
|
Features
|
- Installed fittings: 2 FTP2221 90° Fill - 1-1/2'', 1 FTPE3000 Vent - 5/8'', FTP010 Spanner Wrench
- Durable calendared material impervious to diesel
- Lapped, doubled, reinforced, and vulcanized seams prevent leakage
- Captive tight-threaded brass caps
- Extra-strength webbing straps for secure tie-down
- Two moulded-in loops hold each strap in position.
|
|
See Product Catalog for further details, fittings, diagrams and dimensions.
|
|
|
Options and Accessories |
| Product |
SKU |
Captain's Price |
Options |
Qty |
|
|
Nauta 90 Degree Fill, 1.5" dia
|
|
$55.60
|
|
Nauta 45° Bent Fill, 1-3/8" dia
|
|
$25.25
|
|
Nauta 90 Degree Drawing Nipple, 5/8"
|
|
$21.95
|
|
Nauta Straight Drawing Nipple, 5/8"
|
|
$12.00
|
|
Nauta Straight Fill w/ Extension Tube & Cap,1- 3/8"
|
|
$40.50
|
|
Nauta 90 Degree Fill w/ Extension Tube & Cap, 1-3/8"
|
|
$75.00
|
|
N.P.T. Brass Fitting - 3/4''
|
|
$228.95
|
|
N.P.T. Brass Fitting - 1 1/2''
|
|
$312.95
|
|
Nauta Shut-Off Valve, 1/2"
|
|
$86.95
|
|
Nauta Spanner Wrench for Nauta Fittings
|
|
$14.95
|
|
Nauta Straight Drawing Nipple, 1/4"
|
|
$13.15
|
|
Nauta Straight Drawing Nipple, 1/2" dia
|
|
$12.00
|
|
Nauta Straight Fill, 1.5" dia
|
|
$14.75
|
|
Nauta Straight Fill, 2" dia
|
|
$26.00
|
|
Nauta Straight Fill w/ Cap, 1" dia
|
|
$32.75
|
|
Nauta Tee Fitting, 1/2" x 1/2" x 1/2"
|
|
$6.95
|
|
Nauta Tee Fitting, 1-3/8" x 5/8" x 1- 3/8"
|
|
$14.50
|
|
Nauta Tee Fitting, 1.5" x 1.5" x 1.5"
|
|
$16.00
|
|
Nauta Straight Vent, 5/8"
|
|
$12.10
|
|
Boat Outfitting
