FT915120.jpg Nauta HD Holding / Diesel Tank - 14.5g

Nauta HD Holding / Diesel Tank - 14.5g


MFG#: FT915120
SKU:


$448.00 $359.95 Captain's Price!
Qty   
See our full line of flexible tanks here.
Stop that smelly odor. Replace those cheap holding tanks with a new leakproof, odor-free Nauta Holding Tank.
The more rigorously enforced laws against overboard discharge now make non-compliance extremely costly. A Nauta flexible holding tank, on the other hand, provides a relatively inexpensive Type III solution. The Tedlar lining of these Nauta tanks prevents gas permeation, thus stopping a major odor problem with many other cheaper holding tanks. Combined with a few other components, this solution is both legal and far less costly than re-plumbing a vessel or installing a more complex and expensive Type I or Type II system: it occupies less space and requires no electrical power.

Nauta Flexible Waste Holding Tanks use an extremely rugged 840-denier nylon fabric, coated on both sides with a neoprene/nitrile compound and complete with a Tedlar Lining.  Heavily lapped seams are inside-reinforced with a "doubler" to provide extra strength.  All Nauta tanks are vulcanized to assure  panels and seams for years of trouble-free service.

Features

  • Durable calendared material impervious to liquids or odors
  • Lapped, doubled, reinforced, and vulcanized seams prevent leakage
  • Captive tight-threaded brass caps
  • Extra-strength webbing straps for secure tie-down
  • Two moulded-in loops hold each strap in position.

NOTE: Bladder only. Fittings not included
 

See Product Catalog for further details, fittings, diagrams and dimensions.

Adobe Reader

 

Options and Accessories
Product SKU Captain's Price Options Qty
Nauta 90 Degree Fill, 1.5" dia $55.60
Nauta 45° Bent Fill, 1-3/8" dia $25.25
Nauta 90 Degree Drawing Nipple, 5/8" $21.95
Nauta Straight Drawing Nipple, 5/8" $12.00
Nauta Straight Fill w/ Extension Tube & Cap,1- 3/8" $40.50
Nauta 90 Degree Fill w/ Extension Tube & Cap, 1-3/8" $75.00
N.P.T. Brass Fitting - 3/4'' $228.95
N.P.T. Brass Fitting - 1 1/2'' $312.95
Nauta Shut-Off Valve, 1/2" $86.95
Nauta Spanner Wrench for Nauta Fittings $14.95
Nauta Straight Drawing Nipple, 1/4" $13.15
Nauta Straight Drawing Nipple, 1/2" dia $12.00
Nauta Straight Fill, 1.5" dia $14.75
Nauta Straight Fill, 2" dia $26.00
Nauta Straight Fill w/ Cap, 1" dia $32.75
Nauta Tee Fitting, 1/2" x 1/2" x 1/2" $6.95
Nauta Tee Fitting, 1-3/8" x 5/8" x 1- 3/8" $14.50
Nauta Tee Fitting, 1.5" x 1.5" x 1.5" $16.00
Nauta Straight Vent, 5/8" $12.10